DOBE TP5-3573 Vertical Console Stand for PS5 Slim – Digital & Disc Edition, Black (Open Sealed)

Description

The DOBE TP5-3573 is a compact vertical stand designed specifically for the PlayStation 5 Slim console. It provides a stable base for positioning the console vertically, helping save horizontal desk or entertainment-center space while creating a clean and organized gaming setup.

The stand is compatible with both the PS5 Slim Digital Edition and PS5 Slim Disc Edition. A secure mounting screw attaches the stand to the threaded mounting point on the bottom of the console, helping reduce movement, wobbling, and the risk of accidental tipping.

Its ultra-thin black design complements the PS5 Slim without adding cooling fans, lights, charging docks, cables, or unnecessary bulk. Installation is straightforward and does not require powered connections.

This unit is sold in Open Sealed condition. The packaging has been opened, so the stand, mounting screw, contact points, finish, and overall condition should be inspected before delivery.

Key Features

• Vertical console stand
• Designed for PlayStation 5 Slim
• Compatible with PS5 Slim Digital Edition
• Compatible with PS5 Slim Disc Edition
• Stable circular base
• Secure mounting-screw installation
• Helps reduce console wobble
• Space-saving vertical positioning
• Ultra-thin design
• Durable molded construction
• Black finish
• No power or USB connection required
• No software required
• No cooling fan
• No RGB lighting
• Model: TP5-3573
• Condition: Open Sealed

DOBE identifies the TP5-3573 as a dedicated vertical stand for the newer PS5 console design. Official DOBE TP5-3573 product page

PS5 Slim Compatibility

The stand is designed for:

• PS5 Slim Disc Edition
• PS5 Slim Digital Edition
• PS5 Slim Digital Edition with a compatible disc drive installed

Both PS5 Slim configurations use the newer compact console chassis introduced with the CFI-2000 series.

Retail listings for the exact TP5-3573 confirm compatibility with both the physical-disc and Digital Edition PS5 Slim consoles. PS5 Slim compatibility listing

Not for the Original PS5

The TP5-3573 should not be advertised for the original larger PS5 chassis, including the launch and earlier revised models.

It is not intended for:

• Original PS5 Disc Edition
• Original PS5 Digital Edition
• CFI-1000 series
• CFI-1100 series
• CFI-1200 series

The base shape and mounting alignment differ between the original PS5 and PS5 Slim.

Some retailers also advertise compatibility with PS5 Pro, but DOBE’s primary listing identifies it as a new PS5/PS5 Slim stand. PS5 Pro compatibility should therefore be physically confirmed before it is promised.

Secure Vertical Positioning

The wide base helps distribute the console’s weight while the mounting screw keeps the console attached to the stand.

This provides:

• Improved vertical stability
• Reduced side-to-side movement
• Cleaner console presentation
• Additional confidence around busy gaming setups
• More efficient use of shelf or desk space

The stand reduces tipping risk but cannot prevent accidents caused by unstable furniture, pulling cables, children, pets, or strong impacts.

Space-Saving Design

Vertical positioning reduces the horizontal area occupied by the console.

It is useful for:

• Gaming desks
• TV stands
• Entertainment centers
• Narrow shelves
• Display setups
• Rooms with limited surface space

Adequate ventilation space must still be maintained around the console. The stand does not remove the need for proper airflow.

Passive Stand Without Electronics

The TP5-3573 is a basic mechanical stand and does not contain powered components.

It does not include:

• Cooling fans
• Controller charging
• USB ports
• Headset storage
• Game storage
• RGB lighting
• Additional power connections

This means installation is simple and does not occupy a PS5 USB port.

Ventilation Considerations

The stand is designed to support the PS5 Slim vertically without functioning as an active cooling accessory.

For proper operation:

• Keep the console’s ventilation openings unobstructed.
• Leave clearance around the sides and rear.
• Do not place the console inside a tightly enclosed cabinet.
• Keep dust away from the air inlets.
• Avoid carpet, bedding, and other soft surfaces.
• Do not place objects against the console.

The TP5-3573 does not lower operating temperature through active cooling.

Installation Instructions

1. Fully shut down the PS5 Slim.
2. Disconnect power, HDMI, USB, Ethernet, and other cables.
3. Place the console on a clean, soft surface.
4. Locate the vertical-stand mounting point on the bottom of the console.
5. Remove the mounting-hole cover if required.
6. Align the TP5-3573 with the correct contact points.
7. Insert the supplied mounting screw.
8. Tighten the screw securely by hand without excessive force.
9. Place the console upright on a flat, stable surface.
10. Check that the console does not lean or wobble.
11. Reconnect the cables without placing tension on the console.

Do not overtighten the mounting screw, as this could damage the stand, screw threads, or console mounting point.

Specifications

Dimensions are approximate and may vary slightly by production batch or measurement method.

Third-Party Accessory

The TP5-3573 is manufactured by DOBE and is not the official Sony Interactive Entertainment vertical stand.

It is designed as a lower-cost alternative for PS5 Slim owners who want:

• Vertical console positioning
• Basic mechanical stability
• Compact dimensions
• Simple installation
• No powered accessories

PlayStation and PS5 are trademarks of Sony Interactive Entertainment.

Package Contents

The standard package should include:

• DOBE TP5-3573 Vertical Stand ×1
• Console Mounting Screw ×1
• Installation Documentation, depending on region

The PS5 Slim console and other accessories shown in promotional images are not included.

Package contents should be physically confirmed because the unit is Open Sealed.

Open Sealed Inspection Checklist

Before delivery, confirm:

• Product model is TP5-3573
• Stand is intended for PS5 Slim
• Black finish matches the packaging
• Mounting screw is included
• Screw threads are undamaged
• Center mounting point is intact
• Console-contact sections are undamaged
• Base is not cracked or warped
• Stand sits flat on a level surface
• No pieces or contact pads are missing
• No deep scratches or impact damage are present
• Disc and Digital Edition alignment matches the package instructions
• Product packaging identifies the correct model
• Stand securely supports a compatible console during testing

A missing mounting screw materially affects safe installation and should be disclosed before sale.

Important Notes

• The correct product name is PS5 Slim, not “Silm.”
• This stand is intended for the PS5 Slim chassis.
• It supports both PS5 Slim Digital and Disc Editions.
• It is not designed for the original larger PS5.
• PS5 Pro compatibility should be verified before advertising it.
• This is a third-party DOBE accessory, not an official Sony stand.
• It does not contain a cooling fan.
• It does not charge controllers.
• It does not provide additional USB ports.
• The stand requires no power connection.
• The included screw must be fitted correctly.
• Do not overtighten the mounting screw.
• Use only on a flat, stable and rigid surface.
• Keep all console vents unobstructed.
• Disconnect the console before installation or removal.
• Remove or firmly support the console before moving the entertainment unit.
• Seller warranty should be stated separately for an Open Sealed product.

Best For

• PS5 Slim Digital Edition
• PS5 Slim Disc Edition
• Vertical gaming setups
• Compact desks
• TV cabinets
• Entertainment centers
• Display setups
• Users with limited horizontal space
• Users wanting a simple passive stand
• PS5 Slim owners who do not need cooling or charging features

Why Choose the DOBE TP5-3573?

• Designed specifically for PS5 Slim
• Supports Disc and Digital Editions
• Provides stable vertical positioning
• Secure screw-mounted installation
• Helps reduce console wobble
• Saves horizontal surface space
• Compact ultra-thin design
• Matches modern gaming setups
• No USB port required
• No cables or software
• No noisy cooling fans
• Simple installation
• Lower-cost alternative to the official vertical stand
• Open Sealed condition can provide good value when the stand and mounting screw are fully inspected