Anker 333 USB-C to USB-C Cable – 100W Power Delivery, E-Marker, 480Mbps, 6ft/1.8m Braided Cable – Black | A8757H11 (Open Sealed)

Description

The Anker 333 is a high-power USB-C to USB-C cable designed for charging laptops, tablets, smartphones, gaming devices, and power banks at up to 100W. Its integrated E-Marker chip communicates supported power requirements between compatible devices and chargers for stable high-current charging.

The cable also supports USB 2.0 data transfer at up to 480Mbps. A hard-wearing braided nylon exterior provides additional resistance to bending, pulling, tangling, and everyday wear.

Its 6ft/1.8m length provides convenient reach between wall outlets and desks, beds, sofas, or workstations.

Key Features

• USB-C male to USB-C male
• Up to 100W charging
• Maximum electrical rating of 20V⎓5A
• USB Power Delivery support
• PPS fast-charging support
• Integrated E-Marker chip
• Up to 480Mbps USB 2.0 data transfer
• Durable braided nylon exterior
• Tested multi-thousand-bend construction
• Hook-and-loop cable tie
• Suitable for laptops, tablets and smartphones
• Cable length: 6ft / approximately 1.8m
• Colour: Black
• Model: A8757
• SKU: A8757H11
• Condition: Open Sealed

100W USB-C Charging

When connected to a compatible USB-C Power Delivery charger and device, the cable can carry up to 100W of power.

Maximum electrical rating:

20V⎓5A / 100W

This makes it suitable for high-power USB-C devices such as:

• MacBook Pro
• MacBook Air
• Dell XPS
• HP Spectre
• Lenovo ThinkPad
• Microsoft Surface
• Chromebooks
• USB-C tablets
• USB-C power banks
• Steam Deck
• Nintendo Switch
• USB-C smartphones

Actual output is determined by the lowest-rated part of the charging system:

Power Adapter → Anker 333 Cable → Connected Device

All three components must support the requested charging wattage.

Integrated E-Marker Chip

The built-in E-Marker chip identifies the cable as capable of carrying up to 5A. It communicates its power capabilities to compatible USB-C chargers and devices, supporting safe high-current charging above the standard 3A cable limit.

The E-Marker is particularly important for:

• 100W laptop charging
• 5A USB Power Delivery profiles
• PPS charging
• Compatible Samsung 45W charging
• High-output USB-C power banks

A suitable charger and compatible device are still required.

Power Delivery and PPS Support

The cable supports USB Power Delivery and Programmable Power Supply charging technologies.

With an appropriate PPS charger, it can support compatible fast-charging modes on devices such as selected Samsung Galaxy smartphones. Samsung Super Fast Charging 2.0 requires a compatible Samsung device, suitable PPS charger, and 5A cable.

Proprietary charging systems such as OnePlus SUPERVOOC may not reach their advertised speeds unless the manufacturer’s own charger and cable are used.

480Mbps Data Transfer

The Anker 333 supports USB 2.0 data transfer at up to 480Mbps.

It is suitable for:

• Smartphone synchronization
• Tablet backups
• Transferring documents
• Copying photographs
• Music transfers
• Firmware updates
• Connecting basic USB-C accessories

The theoretical 480Mbps rate equals approximately 60MB per second before protocol overhead. Actual performance depends on the connected ports, devices, storage speed, and file sizes.

No Video Output

This cable does not support video output.

It does not provide:

• DisplayPort Alt Mode
• HDMI conversion
• Thunderbolt 3 or 4
• USB4
• External-monitor support
• High-speed docking-station video
• External GPU connectivity

A video-capable USB-C, USB4, or Thunderbolt cable is required for connecting a laptop to a monitor or video dock.

Braided Nylon Construction

The cable uses a hard-wearing, two-shade braided nylon exterior designed to resist everyday wear and tangling.

It provides additional protection against:

• Repeated bending
• Twisting
• Pulling
• Bag storage
• Desktop abrasion
• Daily plugging and unplugging

Regional Anker listings cite laboratory bend ratings ranging from 5,000 to 12,000 cycles for A8757 package revisions. The exact figure printed on the supplied package should take priority.

Convenient 6ft Length

The 6ft or approximately 1.8m length is useful when a wall socket or charger is not directly beside the connected device.

It is convenient for:

• Bedside charging
• Sofa use
• Office desks
• Laptop workstations
• Travel
• Vehicle charging
• Connecting floor-level wall adapters
• Using devices while charging

Specifications

Wide Compatibility

Compatible with suitable USB-C devices, including:

• USB-C MacBook Pro
• MacBook Air
• Dell XPS
• HP Spectre
• Lenovo ThinkPad
• Microsoft Surface
• Chromebooks
• USB-C iPhones
• Samsung Galaxy smartphones
• Google Pixel smartphones
• OnePlus and Xiaomi devices
• iPad Pro
• iPad Air
• USB-C iPad mini
• Android tablets
• Steam Deck
• Nintendo Switch
• USB-C power banks
• Wireless-earbud cases
• USB-C accessories

Compatibility does not mean every device will accept 100W. Each connected device determines its maximum charging rate.

Not Directly Compatible With

The cable cannot connect directly to:

• Lightning-equipped iPhones
• Lightning-equipped iPads
• Micro-USB devices
• USB-A chargers
• USB-A computers
• Proprietary laptop power connectors

These products require cables or adapters with the correct connector.

Package Contents

The standard package includes:

• Anker 333 USB-C to USB-C Cable, 6ft/1.8m
• Hook-and-loop cable tie
• Welcome guide

A USB-C wall charger is not included.

Since this is an Open Sealed unit, the package contents and cable condition should be verified before purchase.

Open Sealed Condition

“Open Sealed” generally means that the original retail package was previously opened and subsequently resealed. The cable may have been inspected, displayed, returned, or opened for verification.

Before purchasing, confirm:

• USB-C connector condition
• Cable-braid condition
• Absence of cuts, fraying, or severe bends
• 100W charging functionality
• Data-transfer functionality
• Inclusion of the cable tie
• Original model and length
• Seller warranty
• Return eligibility

Open Sealed does not necessarily mean unopened or factory-sealed.

Important Notes

• A compatible 100W charger and 100W-capable device are required to obtain maximum output.
• The cable supports charging up to 100W, not 140W or 240W.
• Data transfer is limited to USB 2.0 at 480Mbps.
• It does not support monitors or video output.
• It does not support Thunderbolt or USB4 data speeds.
• USB-C iPhones are supported; Lightning iPhones require a different cable.
• Proprietary fast-charging protocols may require the device manufacturer’s cable.
• A wall charger is not included.
• Warranty coverage should be confirmed for this Open Sealed unit.

Best For

• 100W USB-C laptop charging
• MacBook Pro and MacBook Air
• USB-C Windows laptops
• Samsung Galaxy fast charging
• USB-C iPhones
• iPad Pro and iPad Air
• Steam Deck
• Nintendo Switch
• High-capacity power banks
• Bedside and desk charging
• Users requiring a longer braided cable

Why Choose the Anker 333 A8757H11?

• Up to 100W USB Power Delivery
• 5A current support
• Integrated E-Marker chip
• PPS compatibility
• Charges laptops, tablets and phones
• Durable braided nylon construction
• Convenient 6ft length
• USB 2.0 data synchronization
• Broad USB-C compatibility
• Reusable cable-management tie
• Black finish suitable for most setups